Q. The rails are laid without bending, at flat curves, where the degree of curve is ?

  • (A) less than 3?
  • (B) equal to 3?
  • (C) more than 3?
  • (D) less than 5?
πŸ’¬ Discuss
βœ… Correct Answer: (A) less than 3?

Q. The bearing plates are used to fix .... rails on wooden sleepers ?

  • (A) flat footed
  • (B) bull headed
  • (C) double headed
  • (D) all the above
πŸ’¬ Discuss
βœ… Correct Answer: (A) flat footed

Q. The technical term used to denote the pulling back of the tracks is known as ?

  • (A) heaved track
  • (B) slewing
  • (C) turn out
  • (D) all of these
πŸ’¬ Discuss
βœ… Correct Answer: (B) slewing

Q. The rail section is divided on the basis of ?

  • (A) type of rails
  • (B) spacing of sleepers
  • (C) gauge of the track
  • (D) speed of trains
πŸ’¬ Discuss
βœ… Correct Answer: (C) gauge of the track

Q. The height of the platform above the rail surface for narrow gauge tracks should be ?

  • (A) 838 to 982 mm
  • (B) 229 to 406 mm
  • (C) 762 to 838 mm
  • (D) 305 to 406 mm
πŸ’¬ Discuss
βœ… Correct Answer: (B) 229 to 406 mm

Q. To provide maximum stability to the track, graded stones from ......... are used ?

  • (A) 100 to 125 mm
  • (B) 20 to 50 mm
  • (C) 75 to 100 mm
  • (D) 50 to 75 mm
πŸ’¬ Discuss
βœ… Correct Answer: (B) 20 to 50 mm

Q. The gradient where extra engine is required to push the train is known as ?

  • (A) station yards gradient
  • (B) pusher gradient
  • (C) momentum gradient
  • (D) ruling gradient
πŸ’¬ Discuss
βœ… Correct Answer: (B) pusher gradient

Q. The minimum value of flangeway clearance is ?

  • (A) 80 mm
  • (B) 60 mm
  • (C) 120 mm
  • (D) 100 mm
πŸ’¬ Discuss
βœ… Correct Answer: (B) 60 mm

Q. The number of sleepers used for rail varies from ?

  • (A) (n+4) to (n+8)
  • (B) (n+1) to (n+4)
  • (C) (n+3) to (n+6)
  • (D) (n+2) to (n+7)
πŸ’¬ Discuss
βœ… Correct Answer: (C) (n+3) to (n+6)

Q. The gauge should .............. slack for curves of more than 438 m ?

  • (A) 30 mm
  • (B) 6 mm
  • (C) 12 mm
  • (D) 20 mm
πŸ’¬ Discuss
βœ… Correct Answer: (B) 6 mm

Jump to