πŸ“Š Dynamics of Machines
Q. The natural frequency (in Hz) of free longitudinal vibrations is equal to
  • (A) 1/2π√s/m
  • (B) 1/2π√g/δ
  • (C) 0.4985/δ
  • (D) all of the mentioned
πŸ’¬ Discuss
βœ… Correct Answer: (D) all of the mentioned
πŸ“Š Dynamics of Machines
Q. The factor which affects the critical speed of a shaft is
  • (A) diameter of the disc
  • (B) span of the shaft
  • (C) eccentricity
  • (D) all of the mentioned
πŸ’¬ Discuss
βœ… Correct Answer: (D) all of the mentioned
πŸ“Š Dynamics of Machines
Q. In under damped vibrating system, if x1 and x2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to
  • (A) x1/x2
  • (B) log (x1/x2)
  • (C) loge (x1/x2)
  • (D) log (x1.x2)
πŸ’¬ Discuss
βœ… Correct Answer: (B) log (x1/x2)
πŸ“Š Dynamics of Machines
Q. The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as
  • (A) damping factor
  • (B) damping coefficient
  • (C) logarithmic decrement
  • (D) magnification factor
πŸ’¬ Discuss
βœ… Correct Answer: (D) magnification factor
πŸ“Š Dynamics of Machines
Q. Which of the following systems produce a vibration in the foundation?
  • (A) unbalanced machine
  • (B) balanced machine
  • (C) coupled machine
  • (D) uncoupled machine
πŸ’¬ Discuss
βœ… Correct Answer: (A) unbalanced machine
πŸ“Š Dynamics of Machines
Q. When a periodic disturbing force is applied to a machine, the force is transmitted to the foundation by the means of spring.
  • (A) true
  • (B) false
  • (C) ---
  • (D) ---
πŸ’¬ Discuss
βœ… Correct Answer: (A) true
πŸ“Š Dynamics of Machines
Q. Which of the following is a type of transmitted force to the foundation?
  • (A) damping force
  • (B) undamping force
  • (C) tensile force
  • (D) torsional force
πŸ’¬ Discuss
βœ… Correct Answer: (A) damping force
πŸ“Š Dynamics of Machines
Q. If isolation factor is negative, then what is the phase difference between transmitted and disturbing force?
  • (A) 180°
  • (B) 90°
  • (C) 450°
  • (D) 360°
πŸ’¬ Discuss
βœ… Correct Answer: (A) 180°
πŸ“Š Dynamics of Machines
Q. In latitude 25.0 S, SA (spin axis) of a FG (free gyro) is in position S40E and horizontal. Find the tilt after 6 hours.
  • (A) 61.16 up
  • (B) 61.16 down
  • (C) 51.15 up
  • (D) none of the mentioned
πŸ’¬ Discuss
βœ… Correct Answer: (A) 61.16 up
πŸ“Š Dynamics of Machines
Q. The steering of a ship means
  • (A) movement of a complete ship up and down in vertical plane about transverse axis
  • (B) turning of a complete ship in a curve towards right r left, while it moves forward
  • (C) rolling of a complete ship sideways
  • (D) none of the mentioned
πŸ’¬ Discuss
βœ… Correct Answer: (B) turning of a complete ship in a curve towards right r left, while it moves forward

Jump to