πŸ“Š Heat Engines
Q. Which of the following chemical acts as anti-freeze?
  • (A) Naphtha
  • (B) Glycol
  • (C) Ethyl alcohol
  • (D) Lead acetate
πŸ’¬ Discuss
βœ… Correct Answer: (B) Glycol
πŸ“Š Heat Engines
Q. A low pressure accumulator is generally used with which of the following turbine
  • (A) Mixed pressure turbine
  • (B) Back pressure turbine
  • (C) Impulse turbine
  • (D) Condensing turbine
πŸ’¬ Discuss
βœ… Correct Answer: (A) Mixed pressure turbine
πŸ“Š Heat Engines
Q. Which is not the cause for loss of heat in boiler due to incomplete combustion?
  • (A) Under cooling of furnace at low ratings
  • (B) Improper secting of boiler
  • (C) Insufficient air supply
  • (D) Boiler drum uninsulated
πŸ’¬ Discuss
βœ… Correct Answer: (D) Boiler drum uninsulated
πŸ“Š Heat Engines
Q. Temporary hardness of water is caused by
  • (A) Bicarbonates of calcium and magnesium
  • (B) Sulphates of calcium and magnesium
  • (C) Chlorides of calcium and magnesium
  • (D) Nitrates of calcium and magnesium
πŸ’¬ Discuss
βœ… Correct Answer: (A) Bicarbonates of calcium and magnesium
πŸ“Š Heat Engines
Q. Crankcase explosion occurs in
  • (A) Four stroke SI engines
  • (B) Four stroke Cl engines
  • (C) Two stroke Cl engines
  • (D) Two stroke SI engines
πŸ’¬ Discuss
βœ… Correct Answer: (D) Two stroke SI engines
πŸ“Š Heat Engines
Q. Which of the following offers best resistance to knocking in S.I. engines?
  • (A) Aromatics
  • (B) Paraffins
  • (C) Carbon dioxide
  • (D) Naphthenes
πŸ’¬ Discuss
βœ… Correct Answer: (A) Aromatics
πŸ“Š Heat Engines
Q. Which of the following engine can work on very lean mixture?
  • (A) Petrol engine
  • (B) Diesel engine
  • (C) Two stroke engine
  • (D) Wankel engine
πŸ’¬ Discuss
βœ… Correct Answer: (B) Diesel engine
πŸ“Š Heat Engines
Q. Overall thermal efficiency of a thermal power plant is
  • (A) Carnot cycle efficiency
  • (B) 50 to 70% of theoretical efficiency
  • (C) Product of boiler efficiency, turbine efficiency and generator efficiency
  • (D) Rankine cycle efficiency
πŸ’¬ Discuss
βœ… Correct Answer: (C) Product of boiler efficiency, turbine efficiency and generator efficiency
πŸ“Š Heat Engines
Q. In gas and petrol engines thermal efficiency may be expected in the range
  • (A) 50 percent
  • (B) 30 to 35 percent
  • (C) 10 - 15 percent
  • (D) 15 to 25 percent
πŸ’¬ Discuss
βœ… Correct Answer: (B) 30 to 35 percent
πŸ“Š Heat Engines
Q. A 200 MW generator should be cooled by
  • (A) Nitrogen
  • (B) Hydrogen peroxide
  • (C) Hydrogen
  • (D) Water
πŸ’¬ Discuss
βœ… Correct Answer: (C) Hydrogen

Jump to