Q. Bulbs in street lighting are all connected in

  • (A) parallel
  • (B) series
  • (C) series-parallel
  • (D) end-to-end
💬 Discuss
✅ Correct Answer: (A) parallel

Published by Vinay Kumar ⭐ 8.55K Points at 15-May-2023 07:54 pm in Current Electricity

You must be Logged in to update hint/solution

💬 Discussion

Related MCQs

Q. Amplifier efficiency is the ratio of RF output power to DC input power. This parameter determines the performance of an amplifier.

Q. A shunt generator running at 1000 r.p.m. has generated e.m.f. as 200 V. If the speed increases to 1200 r.p.m., the generated e.m.f. will be nearly

Q. Aphasoris

Q. The transient response of a system is mainly due to

Q. A linear system at rest is subject to an input signal r(t)=1-e-t. The response of the system for t>0 is given by c(t)=1-e-2t. The transfer function

Q. __________ are the materials having electrical conductivity much less than most of the metals but much greater than that of typical insulators.

Q. A rectangular horn antenna has an aperture area of 3λ × 2λ. Then the maximum directivity that can be achieved by this rectangular

Q. To achieve stable oscillation, Zin + ZL=0 is the only necessary and sufficient condition to be satisfied by the microwave oscillator.

Q. A 40 W bulb is connected in series with a room heater. If now 40 W bulb is replaced by 100 W bulb, the heater output will

Q. To flatten the gain response of a transistor:

📊 Question Analytics

👁️
1148
Total Visits
📽️
3 y ago
Published
🎖️
Vinay Kumar
Publisher
📈
99%
Success Rate