Q. Which of the following operation causes residual compressive stress on the surface of the material?

Related MCQs

Q. If the supply freq of an induction motor is increased by 5%, the synchronous speed will

Q. When pulverised fuel is not used the equipment used for feeding coal to the boiler is

Q. which of the following motor has the constant speed?

Q. If knuckle joint is to fail by crushing failure of pin in fork, then determine the diameter of knuckle pin when 50kN axial tensile force act on rods.

Q. Unit of flow resistance is _________

Q. In a vaccum cleaner, we generally use ____ motor

Q. A compound cylinder with inner radius 50 mm and outer radius 70 mm is made by shrinking one cylinder on to the other cylinder, the junction radius is

Q. The type of cam used for low and moderate speed engines is generally

Q. In case of hardening heat treatment process hypereutectoid steels are heated above --------- temperature

Q. The rotor of a ship rotates in clockwise direction when viewed from stern and the ship takes a left turn. The effect of gyroscopic couple acting on it