Q. The maximum diameter of electrodes being used in submerged arc welding?

  • (A) 30 mm
  • (B) 20 mm
  • (C) 15 mm
  • (D) 10 mm
💬 Discuss
✅ Correct Answer: (D) 10 mm
Explanation: a consumable electrode can be used by the submerged arc welding which is a loop of bare round wire with 1.5 mm to 10 mm diameter. it can be fed routinely throughout the welding gun, and the submerged arc welding electrode composition depends on the welded material.

Published by Mr. Dubey ⭐ 104.82K Points at 20-Sep-2023 12:46 pm in Manufacturing Technology

Explanation by: Mr. Dubey
a consumable electrode can be used by the submerged arc welding which is a loop of bare round wire with 1.5 mm to 10 mm diameter. it can be fed routinely throughout the welding gun, and the submerged arc welding electrode composition depends on the welded material.

💬 Discussion

Related MCQs

Q. From the following which is not the type of protocol used in CIM?

Q. The maximum bending stress in a curved beam having symmetrical section always occur at the

Q. ……… is the ratio of actual cycle efficiency to that of the ideal cycle efficiency

Q. The shorter the wavelength of X or gamma rays:

Q. Thermal equilibrium means that the flow of steam is ____________

Q. The process in which steel is heated 20? to 40?C below the lower critical temperature, held there for a prolonged period and then allowed to cool slow

Q. The field winding of a machine designed for separate excitation is

Q. According to ASTM E709-95, Table 3., alternating current electromagnetic yokes must have a lifting force of at least:

Q. In case the diameter of a shaft is doubled, its torque transmitting capacity will increase by

Q. is another issue that has gained importance gradually,because of two major factors.

📊 Question Analytics

👁️
368
Total Visits
📽️
3 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
98%
Success Rate