📊 Manufacturing Technology
Q. What is camber in roll forming?
  • (A) deviation of the strip edge from a straight line in horizontal plane
  • (B) deviation of the strip edge from a straight line in vertical plane
  • (C) difference in theoretical and actual elongation of the strip
  • (D) waviness of the strip
💬 Discuss
✅ Correct Answer: (A) deviation of the strip edge from a straight line in horizontal plane

Explanation: camber is the deviation of the strip edge from a straight line in the

Explanation by: Mr. Dubey
camber is the deviation of the strip edge from a straight line in the

💬 Discussion

Related MCQs

Q. The first stage of crystal formation is

Q. If the required X ray exposure time for a 225 kV, 5 mA exposure is 3 minutes, approximately what exposure time would be required at 10 mA?

Q. The software that is used to control the computer’s work flow, organize its data and perform housekeeping functions is known as

Q. Penetration theory states that the mass transfer co-coefficient is equal to (where, De is diffusivity and 't' is time)

Q. The velocity of a flat-faced follower when it has contact with the flank of a circular arc cam, is given by

Q. Which among the following transducer is an example of passive transducer?

Q. The input to a 3-ph induction motor is 50KW. The stator losses amount to 800W. The mechanical power developed (slip = 3%)

Q. Which of the following statements is true?

Q. The entropy may be expressed as a function of

Q. If you don’t specify a mode for a parameter, what is the default mode?

📊 Question Analytics

👁️
1043
Total Visits
📽️
2 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
86%
Success Rate