Q. is the distance the tool advances for each revolution of the work.

  • (A) feed
  • (B) depth of cut
  • (C) metal removal rate
  • (D) none of the mentioned
💬 Discuss
✅ Correct Answer: (A) feed
Explanation: the feed of a cutting tool in a lathe work is the distance the tool advances for each revolution of the work. increased feed reduces the cutting time.

Published by Mr. Dubey ⭐ 104.82K Points at 23-Sep-2023 07:30 pm in Process Planning and Cost Estimation

Explanation by: Mr. Dubey
the feed of a cutting tool in a lathe work is the distance the tool advances for each revolution of the work. increased feed reduces the cutting time.

💬 Discussion

Related MCQs

Q. Liquid penetrants can be further categorised by the removal method of excess surface penetrant:

Q. How many number of spray nozzle does each module on spray pond cooling system contains?

Q. How can parts be tested to determine if they have been adequately demagnetized?

Q. A heat engine is supplied with 250 kJ/s of heat at a constant fixed temperature of 227°C. The heat is rejected at 27°C. The cycle is reversibl

Q. Rolling is a forming process in which thickness of the metal plate is decreased by increasing its length.

Q. In normalising steel is heated 40-50 C

Q. The process of removal of permanent hardness of water is

Q. The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model.

Q. for the same compression ratio and heat rejection,

Q. Sometimes over-gassing can cause the sticking of pattern to the mould in Co2 moulding.

📊 Question Analytics

👁️
713
Total Visits
📽️
3 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
95%
Success Rate