M

Mr. Dubey • 100.64K Points
Coach

Q. In the below figure, PC is the connecting rod and OC is the crank making an angle θ with the line of stroke PO and rotates with uniform angular velocity at $$\omega $$ rad/s. The Klien's acceleration diagram for determining the acceleration of the piston P is shown by quadrilateral CQNO. The acceleration of the piston P with respect to the crank-pin C is given by

  • (A) $${\omega ^2}$$ × NO
  • (B) $${\omega ^2}$$ × CO
  • (C) $${\omega ^2}$$ × CN
  • (D) $${\omega ^2}$$ × QN
Share

No solution found for this question.
Add Solution and get +2 points.

You must be Logged in to update hint/solution

Discusssion

Login to discuss.

Related MCQs

Q. An ultrasonic testing technique in which the transducer element is not parallel to the test surface is called:

Q. A shaft has two heavy rotors mounted on it. The transverse natural frequencies, considering each of the rotor separately, are 100 Hz and 200 Hz respec

Q. ........give another method for characterizing structure of Programming language.

Q. Percentage saturation is __________ the relative saturation.

Q. An ultrasonic instrument control which is used to expand or contract the horizontal base line of an A scan display is called:

Q. Cetane number of diesel generally used in India is in the range

Q. If an article develops insufficient hardening after quenching it could be due to any of the following EXCEPT

Q. ……… are also called as parametric subroutines

Q. Coriolis component of acceleration is encountered in

Q. In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum

Question analytics