📊 Process Equipment And Plant Design
Q. Normally, the plate thickness of the bottoms and roofs of vertically cylindrical storage vessels as compared to that of the cylindrical shell is
  • (A) More
  • (B) Less
  • (C) Same
  • (D) More or less depending upon the pressure & temperature inside the vessel and the nature of the fluid contained therein
💬 Discuss
✅ Correct Answer: (B) Less

You must be Logged in to update hint/solution

💬 Discussion

Related MCQs

Q. Action of phosphoric acid on rock phosphate produces

Q. Enrichment of uranium is done to increase the concentration of __________ in the natural uranium.

Q. Extraction of uranium from its ore is done using __________ methods.

Q. Steel tower used for the storage of oleum

Q. A series of equal payments (e.g., deposit or cost) made at equal intervals of time is known as

Q. Materials having resistivity ranging from 1 to 100 ohm. cm is termed as

Q. Weight of 1 m3 of humid air as compared to 1 m3 of dry air, under the same conditions, is

Q. A control system is unstable, if the open loop frequency response exhibits an amplitude ratio exceeding unity at the crossover frequency. This is ____

Q. (∂H/∂T)P is the mathematical expression for

Q. Which is the best tube arrangement (in a shell and tube heat exchanger) if the fluids are clean and non-fouling?

📊 Question Analytics

👁️
957
Total Visits
📽️
3 y ago
Published
🎖️
Ram Sharma
Publisher
📈
87%
Success Rate