📊 AutoCAD (CAD)
Q. Spatial occupancy enumeration is rarely used in CAD applications because it
  • (A) requires a large amount of memory.
  • (B) is not sufficiently accurate for CAD work.
  • (C) requires an obscure operating system.
  • (D) does not allow 3D solids to be edited.
💬 Discuss
✅ Correct Answer: (A) requires a large amount of memory.

You must be Logged in to update hint/solution

💬 Discussion

Related MCQs

Q. In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator.

Q. A 25kW, 3 phase I.M. is running with 6% slip. Its rotor resistance per phase is____ if frictional losses are 850W and rotor current per phase is 65A.

Q. Length of arc of contact is given by

Q. #include <iostream> using namespace std; int main() { float a = 22.22; double b = 22.22; if (a == b) cout << "Matching"; else co

Q. Theodolite is used by

Q. In a drag link quick return mechanism, the shortest link is always fixed. The sum of the shortest and longest link is

Q. A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is

Q. In a slider crank mechanism, the length of the crank and connecting rod are 180 mm and 540 mm respectively. The crank position is 45° from inner d

Q. A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of

Q. Electrical strain gauge works on the principle of

📊 Question Analytics

👁️
682
Total Visits
📽️
1 y ago
Published
🎖️
Priyanka Tomar
Publisher
📈
81%
Success Rate