Q. Exhaust gas leakage into the cooling system is most likely be due to defective

  • (A) Cylinder head gasket
  • (B) Manifold gasket
  • (C) Water pump
  • (D) Radiator
💬 Discuss
✅ Correct Answer: (A) Cylinder head gasket

Published by Priyanka Tomar ⭐ 35.28K Points at 17-Feb-2025 06:51 pm in Automobile Engineering

You must be Logged in to update hint/solution

💬 Discussion

Related MCQs

Q. It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid t

Q. The metal forging operation can only be performed by manual means.

Q. A 4 pole, 3 phase I.M. is running with a slip of 4% producing shaft torque of 300Nm then its output power is ____ kW.

Q. A apinning ballet dancer draws her arms close to her chest. She will now

Q. When a closely coiled helical spring is subjected to a couple about its axis, the stress induced in the wire material of the spring is

Q. All temperatures above the freezing point of gold are usually determined by

Q. In high frequency heating of steel, the heat is generated primarily due to

Q. In a pantograph, all the pairs are

Q. A 3 phase I.M. is running with 5% slip. Its rotor input is 20kW then its rotor efficiency is ____.

Q. A Rankine cycle has efficiency of 19.4%. The steam enters the turbine with enthalpy of 32.85 kJ/Kg while heat of water entering the boiler is 423.6 kJ

📊 Question Analytics

👁️
388
Total Visits
📽️
1 y ago
Published
🎖️
Priyanka Tomar
Publisher
📈
81%
Success Rate