Q. has a constant power spectral density.

  • (A) white noise
  • (B) gaussian noise
  • (C) thermal noise
  • (D) shot noise
💬 Discuss
✅ Correct Answer: (A) white noise
Explanation: thermal noise has a power spectral density for a wide range of frequencies. its plot of frequency v/s noise power is a straight line parallel to y axis.

Published by Mr. Dubey ⭐ 110.47K Points at 13-Sep-2023 07:25 am in Antennas and Microwave Engineering

Explanation by: Mr. Dubey
thermal noise has a power spectral density for a wide range of frequencies. its plot of frequency v/s noise power is a straight line parallel to y axis.

💬 Discussion

Related MCQs

Q. Which of the following devices are commonly used as error detectors in instruments ?

Q. is the reference input minus the primary feedback.

Q. An open resistor, when checked with an ohm-meter reads

Q. A sinusoidal voltage of 5 Hz is applied to the field of a shunt generator. The armature voltage wave

Q. A house served by a 220V supply light, is protected by a 9-Ampere fuse. The maximum number of 60 W bulbs in parallel that can be turned on is

Q. Is a cable is to be designed for use on 1000 kV, which insulation would you prefer?

Q. If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be

Q. Real and equal but with opposite sign.

Q. In series motor which of the following methods can be used for changing the flux per pole?

Q. Which of the following insulation is used in cables ?

📊 Question Analytics

👁️
241
Total Visits
📽️
3 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
94%
Success Rate