📊 Steel Structures Design
Q. Indian standards recommend that for a splice plate, rivets or bolts carrying calculated shear stress through a packing greater than 6 mm thick should be increased above the number required by normal calculations by ?
  • (A) 1.5% for each 1 mm thickness of packing
  • (B) 2.5% for each 1 mm thickness of packing
  • (C) 1.5% for each 2 mm thickness of packing
  • (D) 2.5% for each 2 mm thickness of packing
💬 Discuss
✅ Correct Answer: (D) 2.5% for each 2 mm thickness of packing

You must be Logged in to update hint/solution

💬 Discussion

Related MCQs

Q. The gross section of the web of a beam is defined as

Q. A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistanc

Q. Sand generally contains salt if it is obtained from:

Q. The safe working pressure for a spherical vessel 1.5 m diameter and having 1.5 cm thick wall not to exceed tensile stress 50kg/cm2, is

Q. Excess of silica in the clay ?

Q. Probabilistic time for completion of any activity can be found out from ?

Q. The efficiency of jet propulsion with inlet orifices at right angles to the direction of motion of ship is given by

Q. The power of a centrifugal pump working under constant head and discharge increases with the speed.

Q. The maximum tensile and compressive bending stress in extreme fibres of rolled I-sections and channels on the effective section, is

Q. A Quartzite is resulted from the metamorphic transformation of: ?

📊 Question Analytics

👁️
914
Total Visits
📽️
1 y ago
Published
🎖️
Ritu Singhal
Publisher
📈
97%
Success Rate