Q. For achieving steady state oscillation, the condition to be satisfied in terms of reflection coefficients is:

  • (A) Гin=Гl
  • (B) Гin=-Гl
  • (C) Гin=1/Гl
  • (D) none of the mentioned
💬 Discuss
✅ Correct Answer: (C) Гin=1/Гl
Explanation: the condition for steady state oscillation to be achieved in terms of reflection coefficient is Гin=1/Гl. here Гin is the reflection coefficient towards the reflection coefficient device and Гl is the reflection coefficient towards the load.

Published by Mr. Dubey ⭐ 109.99K Points at 13-Sep-2023 07:27 am in Antennas and Microwave Engineering

Explanation by: Mr. Dubey
the condition for steady state oscillation to be achieved in terms of reflection coefficient is Гin=1/Гl. here Гin is the reflection coefficient towards the reflection coefficient device and Гl is the reflection coefficient towards the load.

💬 Discussion

Related MCQs

Q. What is the z-transform of the signal x[n] = an u(n)?

Q. In Gunn diode oscillator, the Gunn diode is inserted into a waveguide cavity formed by a short circuit termination at one end

Q. Power for lighting in passanger coach, in a long distance electric train, is provided

Q. If SWR=1.5 with a wavelength of 4 cm and the distance between load and first minima is 1.48cm, then the reflection coefficient is:

Q. Determine the sensitivity of the overall transfer function for the system shown in the figure below, at w=1 rad/sec with respect to the feedback path

Q. When a bogie negotiates a curve, reduction in adhesion occurs resulting in sliding. Thus sliding is acute when

Q. The bedding on a cable consists of

Q. If the standing wave ratio for a transmission line is 1.4, then the reflection coefficient for the line is:

Q. For medium duty cranes the short time rating motor used is

Q. Number of tappings for each equilizer ring is equal to

📊 Question Analytics

👁️
577
Total Visits
📽️
3 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
96%
Success Rate