📊 Concrete Technology
Q. Bulk specific gravity of an aggregate is defined as
  • (A) the weight of oven dry aggregate divided by its absolute volume, excluding the natural pores in the aggregate particles
  • (B) the weight of oven dry aggregate divided by its absolute volume, including the natural pores in the aggregate particles
  • (C) the weight of aggregate required to fill a container of unit volume
  • (D) the difference in weight of the aggregate in saturated surface dry condition and in moist condition
💬 Discuss
✅ Correct Answer: (B) the weight of oven dry aggregate divided by its absolute volume, including the natural pores in the aggregate particles

You must be Logged in to update hint/solution

💬 Discussion

Related MCQs

Q. In an impulse turbine, the jet of water impinges on the bucket with a low velocity and after flowing over the vanes, leaves with a high velocity.

Q. When a body is immersed wholly or partially in a liquid, it is lifted up by a force equal to the weight of liquid displaced by the body. This statemen

Q. Meritorious service awards is

Q. The length/diameter ratio of cylindrical specimens used in triaxial test, is generally

Q. A fluid in which shear stress is more than the yield value and shear stress is proportional to the rate of shear strain (or velocity gradient) is know

Q. A centrifugal pump will start delivering liquid only when the pressure rise in the impeller is equal to the ?

Q. The working from whole to the part is done in surveying in order to ensure that ?

Q. In which of the following methods, the observer concentrates on a point in the fluid system?

Q. The deflection angle may be directly obtained by setting the instrument to read.................on back station ?

Q. The layers such as lime stone and sand stone which do not allow the water to pass through them are known as ?

📊 Question Analytics

👁️
215
Total Visits
📽️
2 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
97%
Success Rate