Q. Which of the following are the not characteristics of the closed loop systems?

  • (A) it does not compensate for disturbance
  • (B) it reduces the sensitivity of plant-parameter variations
  • (C) it does not involve output measurements
  • (D) it does not has the ability to control the system transient response
💬 Discuss
✅ Correct Answer: (D) it does not has the ability to control the system transient response
Explanation: feedback refers to the comparison of the final output to the desired output at respective input so as to get accurate and error free result and in the system improves the transient response of the system.

Published by Mr. Dubey ⭐ 109.99K Points at 15-Sep-2023 12:42 am in Control System Engineering

Explanation by: Mr. Dubey
feedback refers to the comparison of the final output to the desired output at respective input so as to get accurate and error free result and in the system improves the transient response of the system.

💬 Discussion

Related MCQs

Q. The gain of an amplifier without feedback is 100 db. If a negative feedback of 3 db is applied, the gain of the amplifier will become _________.

Q. In a parallel R-C circuit, the current always _________ the applied voltage

Q. The pair used for frequency converter is

Q. What is the radiation pattern of an isotropic radiator?

Q. is not a part of ball bearing ?

Q. If SWR=1.5 with a wavelength of 4 cm and the distance between load and first minima is 1.48cm, then the reflection coefficient is:

Q. Which of the following motors are pre-ferred for overhead travelling cranes ?

Q. How many parameters does process control refer to?

Q. The cables, the location of fault is usually found out by comparing

Q. There are three types of the solar cells.

📊 Question Analytics

👁️
772
Total Visits
📽️
3 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
85%
Success Rate