Q. Which of the following is not the feature of modern control system?

  • (A) quick response
  • (B) accuracy
  • (C) correct power level
  • (D) no oscillation
💬 Discuss
✅ Correct Answer: (D) no oscillation
Explanation: for a good control system the speed of response and stability must be high and for the slow and sluggish response is not used and undesirable.

Published by Mr. Dubey ⭐ 109.99K Points at 15-Sep-2023 12:42 am in Control System Engineering

Explanation by: Mr. Dubey
for a good control system the speed of response and stability must be high and for the slow and sluggish response is not used and undesirable.

💬 Discussion

Related MCQs

Q. The number of armature parallel paths in a two-pole D.C. generator having duplex lap winding is

Q. Brushes of D.C. machines are made of

Q. The critical value of gain for a system is 40 and gain margin is 6dB. The system is operating at a gain of:

Q. Cables for 220 kV lines are invariably

Q. When an electric train is moving down a hill the DC motor operates as a DC

Q. In a series RL circuit, 9 V rms is measured across the resistor, and 15 V rms is measured across the inductor. The peak value of the source voltage is

Q. If the gain of the critical damped system is increased it will behave as

Q. Error detector:

Q. The insulation of the cable decreases with

Q. If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be

📊 Question Analytics

👁️
906
Total Visits
📽️
3 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
96%
Success Rate