πŸ“Š Cables
Q. In case of three core flexible cable the colour of the neutral is
  • (A) blue
  • (B) black
  • (C) brown
  • (D) none of the above
πŸ’¬ Discuss
βœ… Correct Answer: (A) blue
πŸ“Š Cables
Q. In single core cables armouring is not done to
  • (A) avoid excessive sheath losses
  • (B) make it flexible
  • (C) either of the above
  • (D) none of the above
πŸ’¬ Discuss
βœ… Correct Answer: (A) avoid excessive sheath losses
πŸ“Š Cables
Q. In the cables, sheaths are used to
  • (A) prevent the moisture from entering the cable
  • (B) provide enough strength
  • (C) provide proper insulation
  • (D) none of the above
πŸ’¬ Discuss
βœ… Correct Answer: (A) prevent the moisture from entering the cable
πŸ“Š Cables
Q. Is a cable is to be designed for use on 1000 kV, which insulation would you prefer?
  • (A) Polyvinyle chloride
  • (B) Vulcanised rubber
  • (C) Impregnated paper
  • (D) Compressed SFe gas
πŸ’¬ Discuss
βœ… Correct Answer: (D) Compressed SFe gas
πŸ“Š Cables
Q. Low tension cables are generally used up to
  • (A) 200 V
  • (B) 500 V
  • (C) 700 V
  • (D) 1000 V
πŸ’¬ Discuss
βœ… Correct Answer: (D) 1000 V
πŸ“Š Cables
Q. Pressure cables are generally not used beyond
  • (A) 11 kV
  • (B) 33 kV
  • (C) 66 kV
  • (D) 132 kV
πŸ’¬ Discuss
βœ… Correct Answer: (C) 66 kV
πŸ“Š Cables
Q. PVC stands for
  • (A) polyvinyl chloride
  • (B) post varnish conductor
  • (C) pressed and varnished cloth
  • (D) positive voltage conductor
πŸ’¬ Discuss
βœ… Correct Answer: (A) polyvinyl chloride
πŸ“Š Cables
Q. Solid type cables are considered unreliable beyond 66 kV because
  • (A) insulation may melt due to higher temperature
  • (B) skin effect dominates on the conductor
  • (C) of corona loss between conductor and sheath material
  • (D) there is a danger of breakdown of insulation due to the presence of voids
πŸ’¬ Discuss
βœ… Correct Answer: (D) there is a danger of breakdown of insulation due to the presence of voids
πŸ“Š Cables
Q. The advantage of cables over overhead transmission lines is
  • (A) easy maintenance
  • (B) low cost
  • (C) can be used in congested areas
  • (D) can be used in high voltage circuits
πŸ’¬ Discuss
βœ… Correct Answer: (C) can be used in congested areas
πŸ“Š Cables
Q. The advantage of oil filled cables is
  • (A) more perfect impregnation
  • (B) smaller overall size
  • (C) no ionisation, oxidation and formation of voids
  • (D) all of the above
πŸ’¬ Discuss
βœ… Correct Answer: (D) all of the above

Jump to