πŸ“Š Furnace Technology
Q. Temperature of a furnace fired with low calorific value fuel gas (i.e. lean gas) can be increased by
  • (A) Preheating the combustion air
  • (B) Oxygen enrichment of combustion air
  • (C) Preheating the fuel gas
  • (D) All of the above
πŸ’¬ Discuss
βœ… Correct Answer: (D) All of the above
πŸ“Š Furnace Technology
Q. The heating capacity of muffle furnace depends on the
  • (A) Surface area & emissivity of the stock
  • (B) Properties of the muffle wall (temperature, area, emissivity)
  • (C) Both A & B
  • (D) Neither A nor B
πŸ’¬ Discuss
βœ… Correct Answer: (C) Both A & B
πŸ“Š Furnace Technology
Q. Fuel economy in an industrial furnace operation can not be achieved by the use of
  • (A) Stoichiometric combustion air
  • (B) Non-preheated combustion air
  • (C) Combustion air not enriched with oxygen
  • (D) Recupterators
πŸ’¬ Discuss
βœ… Correct Answer: (A) Stoichiometric combustion air
πŸ“Š Furnace Technology
Q. Oxygen enrichment of combustion air does not result in increase of the
  • (A) Heat transfer rate in the furnace
  • (B) Stack loss
  • (C) Oxygen in the flue gas
  • (D) Flame temperature
πŸ’¬ Discuss
βœ… Correct Answer: (C) Oxygen in the flue gas
πŸ“Š Furnace Technology
Q. Size of the combustion chamber of a furnace depends upon the
  • (A) Heat release rate of the fuel
  • (B) Preheat temperature of fuel & air
  • (C) Method of mixing the fuel & air
  • (D) All of the above
πŸ’¬ Discuss
βœ… Correct Answer: (D) All of the above
πŸ“Š Furnace Technology
Q. In order to maintain an oxidising atmosphere in a furnace, it should have
  • (A) More of excess air
  • (B) Less of excess air
  • (C) More of CO in flue gas
  • (D) More of CO2 in flue gas
πŸ’¬ Discuss
βœ… Correct Answer: (A) More of excess air
πŸ“Š Furnace Technology
Q. Ceramic coating material for furnace refractory, which increases its emissivity and thus the radiation heat transfer rate in the furnace, comprises of
  • (A) Graphite powder
  • (B) Thoria
  • (C) Zircon powder
  • (D) Beryllium
πŸ’¬ Discuss
βœ… Correct Answer: (C) Zircon powder
πŸ“Š Furnace Technology
Q. Which of the following furnaces will have maximum thermal efficiency?
  • (A) Rotary kilns
  • (B) Boiler furnace
  • (C) Walking beam reheating furnace
  • (D) Soaking pits
πŸ’¬ Discuss
βœ… Correct Answer: (B) Boiler furnace
πŸ“Š Furnace Technology
Q. An example of a periodic furnace is the
  • (A) Rotary kilns
  • (B) Coke oven heating chamber
  • (C) Blast furnace
  • (D) Blast furnace stoves
πŸ’¬ Discuss
βœ… Correct Answer: (D) Blast furnace stoves

Jump to