πŸ“Š Hydraulics and Fluid Mechanics
Q. According to Bernoulli's equation
  • (A) Z + p/w + v²/2g = constant
  • (B) Z + p/w - v²/2g = constant
  • (C) Z - p/w + v²/2g = constant
  • (D) Z - p/w - v²/2g = constant
πŸ’¬ Discuss
βœ… Correct Answer: (A) Z + p/w + v²/2g = constant
πŸ“Š Hydraulics and Fluid Mechanics
Q. Newton's law of viscosity is a relationship between
  • (A) Pressure, velocity and temperature
  • (B) Shear stress and rate of shear strain
  • (C) Shear stress and velocity
  • (D) Rate of shear strain and temperature
πŸ’¬ Discuss
βœ… Correct Answer: (B) Shear stress and rate of shear strain
πŸ“Š Hydraulics and Fluid Mechanics
Q. Differential manometer is used to measure
  • (A) Pressure in pipes, channels etc.
  • (B) Atmospheric pressure
  • (C) Very low pressure
  • (D) Difference of pressure between two points
πŸ’¬ Discuss
βœ… Correct Answer: (D) Difference of pressure between two points
πŸ“Š Hydraulics and Fluid Mechanics
Q. Non uniform flow occurs when
  • (A) The direction and magnitude of the velocity at all points are identical
  • (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time
  • (C) Velocity, depth, pressure, etc. change from point to point in the fluid flow.
  • (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane
πŸ’¬ Discuss
βœ… Correct Answer: (C) Velocity, depth, pressure, etc. change from point to point in the fluid flow.
πŸ“Š Hydraulics and Fluid Mechanics
Q. Venturimeter is used to
  • (A) Measure the velocity of a flowing liquid
  • (B) Measure the pressure of a flowing liquid
  • (C) Measure the discharge of liquid flowing in a pipe
  • (D) Measure the pressure difference of liquid flowing between two points in a pipe line
πŸ’¬ Discuss
βœ… Correct Answer: (C) Measure the discharge of liquid flowing in a pipe
πŸ“Š Hydraulics and Fluid Mechanics
Q. The pressure measured with the help of a pressure gauge is called
  • (A) Atmospheric pressure
  • (B) Gauge pressure
  • (C) Absolute pressure
  • (D) Mean pressure
πŸ’¬ Discuss
βœ… Correct Answer: (B) Gauge pressure
πŸ“Š Hydraulics and Fluid Mechanics
Q. The total pressure force on a plane area is equal to the area multiplied by the intensity of pressure at the Centroid, if
  • (A) The area is horizontal
  • (B) The area is vertical
  • (C) The area is inclined
  • (D) All of the above
πŸ’¬ Discuss
βœ… Correct Answer: (D) All of the above
πŸ“Š Hydraulics and Fluid Mechanics
Q. The most economical section of a rectangular channel is one which has hydraulic mean depth or hydraulic radius equal to
  • (A) Half the depth
  • (B) Half the breadth
  • (C) Twice the depth
  • (D) Twice the breadth
πŸ’¬ Discuss
βœ… Correct Answer: (A) Half the depth

Jump to