Q. A unijunction transistor has ?

  • (A) two anodes and one gate
  • (B) anode, cathode and a gate
  • (C) two bases and one emitter
  • (D) anode, cathode and two gates
πŸ’¬ Discuss
βœ… Correct Answer: (C) two bases and one emitter

Q. An SCS has ?

  • (A) two anodes and two gates
  • (B) three layers and four terminals
  • (C) four layers and three terminals
  • (D) one anode, one cathode and two gates
πŸ’¬ Discuss
βœ… Correct Answer: (D) one anode, one cathode and two gates

Q. The operation of a thermocouple is based on ?

  • (A) Seebeck effect
  • (B) Peltier effect
  • (C) Thomson effect
  • (D) Faraday's laws
πŸ’¬ Discuss
βœ… Correct Answer: (A) Seebeck effect

Q. Holding current in PNPN diode is the ?

  • (A) gate current required to keep the device ON
  • (B) minimum current to keep the, SCR ON
  • (C) current at breakover point
  • (D) minimum current to keep the device OFF
πŸ’¬ Discuss
βœ… Correct Answer: (B) minimum current to keep the, SCR ON

Q. Most SCRs can be turned off by voltage reversal during negative half cycle of the A.C. supply for ?

  • (A) all frequencies
  • (B) frequencies upto 200 Hz
  • (C) frequencies upto 30 kHz
  • (D) none of the above
πŸ’¬ Discuss
βœ… Correct Answer: (B) frequencies upto 200 Hz

Q. A voltmeter must have very high internal resistance so that ?

  • (A) Accuracy is high
  • (B) Resolution is high
  • (C) Draws small amount of current
  • (D) Creates high loading effect circuit
πŸ’¬ Discuss
βœ… Correct Answer: (C) Draws small amount of current

Q. Errors which may be variable both in magnitude and nature (positive or negative) are classified as ............. error ?

  • (A) Hysteresis
  • (B) Random
  • (C) Interaction
  • (D) Systematic
πŸ’¬ Discuss
βœ… Correct Answer: (B) Random

Q. The use of ........ instruments is merely confined within laboratories instruments. as standardizing ?

  • (A) Absolute
  • (B) Indicating
  • (C) Recording
  • (D) Integrating
πŸ’¬ Discuss
βœ… Correct Answer: (A) Absolute

Q. To reduce the loading effect, an instrument must possess ?

  • (A) Zero input impedance
  • (B) Unit input impedance
  • (C) High input impedance
  • (D) Low input impedance
πŸ’¬ Discuss
βœ… Correct Answer: (C) High input impedance

Jump to