Q. Ionisation gauge is used to measure pressures

  • (A) Below 3 microns
  • (B) Above 3 microns
  • (C) Above 100 microns
  • (D) Between 100 and 200 microns
💬 Discuss
✅ Correct Answer: (A) Below 3 microns

Published by Mr. Dubey ⭐ 111.54K Points at 21-Sep-2023 06:41 pm in Mechanical Measurements

You must be Logged in to update hint/solution

💬 Discussion

Related MCQs

Q. The slowest cooling rate is achieved when steel is quenched in

Q. An 8-pole , 50Hz,3-ph indduction motor running with a slip of 4% is taking 20KW. Stator losses amount 0.5KW. The total torque develped is

Q. Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.

Q. If the required exposure time for a 1850 GBq (50 curie) Ir-192 source is 4 minutes, what exposure time would be required for 925 GBq (25 curie) source

Q. The basis for measuring thermodynamic property of temperature is given by ……. Law of thermodynamics

Q. Both Soderberg and Gerber criteria for failure theories are overly conservative

Q. The power loss in an overhead transmission line is mainly due to

Q. General pivot point rotation can be expressed as

Q. A ball of mass 1 kg moving with a velocity of 2 m/sec collides directly with a stationary ball of mass 2 kg. If the first ball comes to rest after the

Q. A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditio

📊 Question Analytics

👁️
759
Total Visits
📽️
3 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
86%
Success Rate