Q. What is the capacity of low pressure hydraulic ash handling system?

  • (A) 80 tonnes/hour
  • (B) 22 tonnes/hour
  • (C) 50 tonnes/hour
  • (D) 10 tonnes/hour
💬 Discuss
✅ Correct Answer: (C) 50 tonnes/hour
Explanation: the capacity of low pressure hydraulic ash handling system is 50tonnes/hour at a speed of 3m/s. since the ash produced is mixed in water and dumped, the water has the ability to dissolve and intake more amount of ash. and this mixture is spread throughout the sump.

Published by Mr. Dubey ⭐ 111.54K Points at 23-Sep-2023 07:25 pm in Power Plant Engineering (PPE)

Explanation by: Mr. Dubey
the capacity of low pressure hydraulic ash handling system is 50tonnes/hour at a speed of 3m/s. since the ash produced is mixed in water and dumped, the water has the ability to dissolve and intake more amount of ash. and this mixture is spread throughout the sump.

💬 Discussion

Related MCQs

Q. The expression, ln(F/W) = ∫ xF xW [dx/y* - x)] is

Q. The velocity of surface waves is approximately shear waves in the same material.

Q. What is feature of the Loffler boilers?

Q. When two pulleys of different diameters are connected by means of an open belt, the angle of contact at the ________ pulley must be taken into conside

Q. A Rankine cycle has efficiency of 19.4%. The steam enters the turbine with enthalpy of 32.85 kJ/Kg while heat of water entering the boiler is 423.6 kJ

Q. compound dc motor is shown below. What conclusions can be made?

Q. Kinematic pairs are those which have two elements that

Q. If solar energy Qr is available at a reservoir storage temperature of Tr and if quantity of heat Qa is transferred by the solar collector at temperatu

Q. The value of reheat factor is of the order of

Q. The maximum number of generators in a power plant must be

📊 Question Analytics

👁️
243
Total Visits
📽️
3 y ago
Published
🎖️
Mr. Dubey
Publisher
📈
89%
Success Rate