πŸ“Š Construction Management
Q. If the gross vehicle weight of a truck is 30 tonne and rolling resistance is 30 kg/tonne, then the tractive effort required to keep the truck moving at a uniform speed is
  • (A) 30 kg
  • (B) 300 kg
  • (C) 900 kg
  • (D) 1000 kg
πŸ’¬ Discuss
βœ… Correct Answer: (C) 900 kg
πŸ“Š Construction Management
Q. Works costing less than Rs. 20,000 are treated as
  • (A) Any project
  • (B) Major projects
  • (C) Minor projects
  • (D) All the above
πŸ’¬ Discuss
βœ… Correct Answer: (C) Minor projects
πŸ“Š Construction Management
Q. A machine costs Rs. 20000 and its useful life is 8 years. The money is borrowed at 8% interest per annum. The capital recovery factor at 8% interest per annum for 8 years is 0.174. The annual equipment cost of the machine will be
  • (A) Rs. 1740
  • (B) Rs. 3480
  • (C) Rs. 5220
  • (D) Rs. 6960
πŸ’¬ Discuss
βœ… Correct Answer: (B) Rs. 3480
πŸ“Š Construction Management
Q. Railway projects are treated as
  • (A) Light construction
  • (B) Heavy construction
  • (C) Industrial construction
  • (D) None of these
πŸ’¬ Discuss
βœ… Correct Answer: (B) Heavy construction
πŸ“Š Construction Management
Q. Consider the following statements: In the critical path method of construction planning, Free Float can be. 1. Greater than Total Float. 2. Greater than Independent Float 3. Equal to Total Float. 4. Less than Independent Float. Of these statements
  • (A) 1 and 4 are correct
  • (B) 2 and 3 are correct
  • (C) 1 and 4 are correct
  • (D) 1 and 2 are correct
πŸ’¬ Discuss
βœ… Correct Answer: (B) 2 and 3 are correct
πŸ“Š Construction Management
Q. The original cost of an equipment is Rs.10,000. Its salvage value at the end of its total useful life of five years is Rs. 1,000. Its book value at the end of two years of its useful life (as per straight line method of evaluation of depreciation) will be
  • (A) Rs. 8,800
  • (B) Rs. 7,600
  • (C) Rs. 6,400
  • (D) Rs. 5,000
πŸ’¬ Discuss
βœ… Correct Answer: (C) Rs. 6,400
πŸ“Š Construction Management
Q. For completion of a project, the critical path of the network represents
  • (A) Minimum time
  • (B) Maximum time
  • (C) Maximum cost
  • (D) Minimum cost
πŸ’¬ Discuss
βœ… Correct Answer: (A) Minimum time
πŸ“Š Construction Management
Q. The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is
  • (A) 3425 kg
  • (B) 5515 kg
  • (C) 4350 kg
  • (D) 2975 kg
πŸ’¬ Discuss
βœ… Correct Answer: (B) 5515 kg
πŸ“Š Construction Management
Q. Which one of the following represents an event?
  • (A) Concrete cured
  • (B) Fixing of door
  • (C) Plastering of walls
  • (D) Selecting sites
πŸ’¬ Discuss
βœ… Correct Answer: (A) Concrete cured
πŸ“Š Construction Management
Q. The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively
  • (A) 80 and 90
  • (B) 90 and 80
  • (C) 85 and 75
  • (D) 75 and 83
πŸ’¬ Discuss
βœ… Correct Answer: (D) 75 and 83

Jump to